Question

How to use a dvd player for karaoke playback
1.connect a microphen to mic1 input space on the front of your dvd player . connect a second microphone to the mic2 input space if two microphones are desired
2. insert the disk you will sing along with into the player ,and then select the track to which you will sing
3. adjust the microphone volume control dial as needed for the microphone echo volume . this is located next to the mic1/mic2 input
4. adjust the echo dial as needed for the microphone echo volume . this dial is located next to the microphone volume control dial
5. locate the follow button on your remote control . you will find button immediately below the number keypad on the side . use this button to choose the correct partner mode
7. remove a voice if needed during vcd playback by pushing ch/audio and picking the right channel . during dvd playback , do the same by pushing ch/audio and picking the right audio mode ..
8. sing your heart out





jawablah pertanyaan nya!!!!!!!!!!!
1. what is the purpose of the text ?
2. what is the materials should you prepare for karaoke playback??
3. where do you connect the firs microphone into???
4. what do you after adjusting the echo dial for the microphone volume??

Answer 1

1. The purpose of the text is to inform the reader on how to use a DVD player for karaoke playback.
2. The materials that should be prepared for karaoke playback are a microphone, a DVD player, a disc, a microphone volume control dial, and a remote control.
3. Connect the first microphone (mic 1) into the DVD player.
4. After adjusting the echo dial, locate the follow button on the remote control.