How to Install CD-ROM
1.Turn off your computer and unplug power cord from power outlet.
2.Carefully remove the computer cover.
3.Set the Master/Slave jumper on the rear panel of drive.
(To get best results, we strongly suggest that you connect your device to the Secondary IDE port as the MASTER device.)
4.Connect the IDE cable to the drive.sambungkn kabel IDE ke drive
5.Connect the 4-pole power cable to the drive.
6.Connect the audio cable (if applicable).
7.Carefully slide the drive into the empty bay and mount it. Then replace the computer cover. .
8.Plug your computer back to power outlet and then turn the power on.
45. We have to connect the CD-ROM to the following types of cable EXCEPT ….
A. power cable
B. audio cable
C. IDE cable
D. monitor cable
(tolong dikasih pembahasan kenapa jawabannya a,b,c atau d ya... makasih)
1.Turn off your computer and unplug power cord from power outlet.
2.Carefully remove the computer cover.
3.Set the Master/Slave jumper on the rear panel of drive.
(To get best results, we strongly suggest that you connect your device to the Secondary IDE port as the MASTER device.)
4.Connect the IDE cable to the drive.sambungkn kabel IDE ke drive
5.Connect the 4-pole power cable to the drive.
6.Connect the audio cable (if applicable).
7.Carefully slide the drive into the empty bay and mount it. Then replace the computer cover. .
8.Plug your computer back to power outlet and then turn the power on.
45. We have to connect the CD-ROM to the following types of cable EXCEPT ….
A. power cable
B. audio cable
C. IDE cable
D. monitor cable
(tolong dikasih pembahasan kenapa jawabannya a,b,c atau d ya... makasih)
A2468JOR
Kelihatannya D. Monitor Cable
0 votes
Thanks 0
hyeun
alasannya kenapa d?
A2468JOR
masih bisa dijawab? soalnya, mana mungkin monitor berhubungan dengan CD-ROM.
More Questions From This User See All