Question

Pertanyaan nya
1.what is the 1st steps in refilling the cartridge?
2.Why should we put on the latex gloves?
3.How do we insert the ink refill in the proper hole?
4.what do we do if the label has lost its ability to stock?
5.according to you, is it easy or difficult to refill the ink cartridge?

Answer 1

1. the steps of refilling the cartridge:
   - remove the cartridge from the printer
   - open the inkjet refill kit and choose the cartridge that will be refilled
   - insert in the proper hole and squeeze it gently
   - pop back the cartridge to the printer and follow the direction of the printer

2. to protect the hand or fingers from the ink and avoid the spreaded ink

3.for finding the proper hole we can see the colour of the ink we refill to the place that has the same colour with that.

4. it may makes the ink come out from the cartridge.

5. it will be easy to do if we can understand the order and follow the direction

Answer 2

1. the 1st step in refilling the cartridge is remove the cartridge from the printer. (soalnya seharusnya 1st step, bukan steps, karena tertulis pertama, sehingga hny satu langkah, yaitu point no 2). 2. we should put on the latex gloves because the next steps can get messy (point no 4). 3. we insert the ink refill in the proper hole gently (point no 6). 4. if the label has lost its ability to stock, take a piece of tape, and tape the whole label down. (point no 7) 5.according to you, it is easy to refill the ink cartridge because there are some directions to guide us refilling ink cartridges.