Lest make a monster with bright eyes
you will need :
- 2 bulbs in bulb holders
- 3 wires
- a battery
- coloured card
- coloured paper
- scissor
- sticky tape
- glue
1. attach a wire to each of the screws on one bullb holder
2. connect the other end of these wires to the second bulb holder. connect your third wire to the other screw on the second bulb holder
3. connect the loose wires to the ends of tge battery
4. cut the card into a monster face with two eye holes. push the bulbs through the holes in the back of the card. tape the bulbs and the battery into the back of the card
5. turn the monster face around. finish it by gluing on a paper mouth and nose . watch the eyes glow!
practice 6
1. what should you do to make a monster
2. where should you attach a wire
3. which tool should you connect to the second holder
4. what do you connect to the ends of the battery
5. where do you push the bulbs to
6. where should you tape the bulbs and the battery
you will need :
- 2 bulbs in bulb holders
- 3 wires
- a battery
- coloured card
- coloured paper
- scissor
- sticky tape
- glue
1. attach a wire to each of the screws on one bullb holder
2. connect the other end of these wires to the second bulb holder. connect your third wire to the other screw on the second bulb holder
3. connect the loose wires to the ends of tge battery
4. cut the card into a monster face with two eye holes. push the bulbs through the holes in the back of the card. tape the bulbs and the battery into the back of the card
5. turn the monster face around. finish it by gluing on a paper mouth and nose . watch the eyes glow!
practice 6
1. what should you do to make a monster
2. where should you attach a wire
3. which tool should you connect to the second holder
4. what do you connect to the ends of the battery
5. where do you push the bulbs to
6. where should you tape the bulbs and the battery
More Questions From This User See All
Anda akan perlu :
- 2 umbi pada pemegang bohlam
- 3 kabel
- sebuah baterai
- kartu berwarna
- kertas berwarna
- gunting
- pita lengket
- lem
1. pasang kawat ke masing-masing sekrup pada satu tempat banteng
2. hubungkan ujung kabel lainnya ke dudukan bola lampu kedua. sambungkan kabel ketiga ke sekrup lain pada dudukan bola kedua
3.sambungkan kabel longgar ke ujung baterai tge
4. potong kartu itu ke wajah monster dengan dua lubang mata. dorong bola lampu melalui lubang di bagian belakang kartu. tape lampu dan baterai ke bagian belakang kartu
5. Balikkan wajah monster itu. selesaikan dengan menempelkan kertas dan hidung kertas. perhatikan mata bercahaya!
praktek 6
1. Apa yang harus Anda lakukan untuk membuat monster
2. Di mana sebaiknya Anda memasang kawat
3.Alat mana yang harus Anda hubungkan ke dudukan kedua
4. Apa yang Anda hubungkan ke ujung baterai
5. di mana Anda mendorong bola lampu ke
6. Di mana sebaiknya Anda mengencangkan umbi dan baterai..
Di indonesia in bukan..??
Maaf kalau salah