How to make paper boat. tolong bantu ya. jawab bahasa inggris
putriaprilliaa
1. Take a piece of rectangular paper and place it in front of you so the paper is in portrait format - with the longer edges to the side. Fold it in half lengthwise so the top meets the bottom - with the fold at the "top" of the piece of paper. 2. Fold in to half width and unfold - this marks your center line. 3. Fold the top right corner down so the top edge line up with the center line 4. Flip Over. Repeat. This should create a "house" like shape with a "big" roof line and about an inch of paper below the triangle of the roof 5. Fold bottom edge up 6. Flip over the paper and repeat. This makes a paper hat shape 7. Grasp the hat shape in the center. Do this at the point where the diagonal creases meet 8. Pull apart the paper and flatten. You should end up with a diamond-shape piece of paper 9. Fold the bottom edge up. Leave about a 1/4 of an inch (0.65 mm) border between the top edge and the edge of portion that has been folded-up. Once done, flip the paper over 10. Fold the bottom edge to line up with the other side 11. Hold the paper ship in the middle of the bottom edge. Pull it apart and flatten. 12. Take the left and right triangular portions and pull apart. The bottom edge will flip up on this own 13. DONE!!!
1 votes Thanks 0
MuhammadAlifAzhari
1. Lay out the paper and fold 2. Fold the corners 3. Fold the brim 4. Open the boat 5. Fold two more triangles 6. Open the boat again 7. Finis to reveal the sail
2. Fold in to half width and unfold - this marks your center line.
3. Fold the top right corner down so the top edge line up with the center line
4. Flip Over. Repeat. This should create a "house" like shape with a "big" roof line and about an inch of paper below the triangle of the roof
5. Fold bottom edge up
6. Flip over the paper and repeat. This makes a paper hat shape
7. Grasp the hat shape in the center. Do this at the point where the diagonal creases meet
8. Pull apart the paper and flatten. You should end up with a diamond-shape piece of paper
9. Fold the bottom edge up. Leave about a 1/4 of an inch (0.65 mm) border between the top edge and the edge of portion that has been folded-up. Once done, flip the paper over
10. Fold the bottom edge to line up with the other side
11. Hold the paper ship in the middle of the bottom edge. Pull it apart and flatten.
12. Take the left and right triangular portions and pull apart. The bottom edge will flip up on this own
13. DONE!!!
2. Fold the corners
3. Fold the brim
4. Open the boat
5. Fold two more triangles
6. Open the boat again
7. Finis to reveal the sail