Buatlah teks prosedur cara membuat layang-layang! tolong jawab ya ..
almaainun27
Materials Needed : 1. A2 paper 2. String (thick) 3. Pipe cleaners / sticks 4. Scissors 5. Colored pencils (optional) 6. Tape (optional) Steps : 1. Get a piece of paper (any color), and cut a diamond shape from it. Sometimes it is better if you tape four pieces together. But you have to tape them together the right way. Tape two together, then tape together the other two. Tape them on each other. 2. To cut a diamond shape on the paper (if you are not taping four sheets together), cut the 4 corners off. It should be in the shape of a square. the paper horizontally. 3. Repeat step 2 but this time lay it across the paper vertically. 4. Tie the two sticks or pipe cleaners together. Make it as tight as possible. 5. Pierce 2 holes in the diamond-shaped paper. On the inside corner where the two sticks cross, thread a thick string. 6. Using the other end of the thick string, do the same. Then tie the string when both of the ends of the string are threaded through. 7. Tie a long and strong string onto the sticks or pipe cleaners to form the tail. You can add small strips of paper to the end of this tail string for added buoyancy and weighting. It also looks more complete. 8. Color the kite if you want. 9. Find a breeze or some light wind, have someone to help you hold your kite as you wait for wind to come. 10. Have fun flying your kite
1. A2 paper
2. String (thick)
3. Pipe cleaners / sticks
4. Scissors
5. Colored pencils (optional)
6. Tape (optional)
Steps :
1. Get a piece of paper (any color), and cut a
diamond shape from it. Sometimes it is
better if you tape four pieces together. But
you have to tape them together the right
way. Tape two together, then tape together
the other two. Tape them on each other.
2. To cut a diamond shape on the paper (if
you are not taping four sheets together),
cut the 4 corners off. It should be in the
shape of a square. the paper horizontally.
3. Repeat step 2 but this time lay it across the
paper vertically.
4. Tie the two sticks or pipe cleaners together.
Make it as tight as possible.
5. Pierce 2 holes in the diamond-shaped
paper. On the inside corner where the two
sticks cross, thread a thick string.
6. Using the other end of the thick string, do
the same. Then tie the string when both of
the ends of the string are threaded
through.
7. Tie a long and strong string onto the sticks
or pipe cleaners to form the tail. You can
add small strips of paper to the end of this
tail string for added buoyancy and
weighting. It also looks more complete.
8. Color the kite if you want.
9. Find a breeze or some light wind, have
someone to help you hold your kite as you
wait for wind to come.
10. Have fun flying your kite